H3C Technologies H3C WA2600 Series WLAN Access Points - Manual (Page 12)

6
Installing the AP
CAUTION:
The WA2620i-AGN is usually installed on a high position, such as a wall
or ceiling, so the maintenance personnel cannot log in from the console
port to maintain and debug the AP. H3C recommends that you log in to
the AP through the console port to perform remote login (Telnet or web
login) configuration, or log in through Telnet or web by using the default
login information before you install the AP. For more information about
logging in to the AP, see “ Logging in to the fat AP .”
Figure 3 Installation flowchart
Start
Determine the installation position
Mount the AP to a wall
End
Check before
installation
Install the wall-
mounting bracket
Ceiling mounting
Install the AP
Connect the power
supply
Mount the AP on a table
Connect the AP to
the network
Mount the wall-
mounting bracket to
the ceiling