Logging in through the console port, Logging in through telnet or web – H3C Technologies H3C WA2600 Series WLAN Access Points User Manual
Page 29
Advertising
23
Figure 19 HyperTerminal window
Logging in through the console port
Power on the AP, and you can see the following information:
System is starting...
Booting Normal Extend BootWare.
…
System application is starting...
Startup configuration file does not exist.
User interface con0 is available.
Press ENTER to get started.
Logging in through Telnet or web
By default, the Telnet and web functions are enabled. You can use the
following default settings to log in to the web interface:
Advertising