Modifying a tcp service resource, Configuration guidelines on a macos client – H3C Technologies H3C SecBlade SSL VPN Cards User Manual
Page 43
35
Modifying a TCP Service Resource
Select a resource and click Configure in the page shown in
to modify the TCP service resource
in the page shown in
. For information about the configuration items, see
Configuration Guidelines on a MacOS Client
If the SSL VPN client is running on a terminal running a MacOS, follow these guidelines when you
configure the TCP application resources:
•
The local address of a TCP application resource can be configured as 127.0.0.1 or a non-IP
address.
•
The local port number of a TCP application resource must be greater than 1024.
•
The local port number of each TCP application resource must be unique.
If the conditions above cannot be met, the SSL VPN client in the MacOS cannot correctly listen to the
resources.