Grass Valley DD10 part 1 - Manual (Page 101)

2.13 Stores Panel Diamond digital DD10
95
For creating an individual mask, preferably use a wipe signal as a brush. For this
purpose, select with Pattn1 or Pattn2 the corresponding generator.
•
In order to freely design a mask, recall with Paint mode the PaintModeMasking
mode. On the preview monitor, the pattern is now displayed as a cursor which
can be freely positioned with the trackball.
Pattern size and modification can be adjusted on the wipe panel.
The size can be adjusted with the SIZE control.
•
Paint enables the painting procedure and the cursor can be used as a ”brush”
for painting.
•
Rub enables the cursor to be used as a ”rubber” for rubbing out
•
Clear deletes the contents of the mask store.
•
Mask shift enables shifting the output picture with the trackball.
When selecting a key signal as a brush, either the key signal can be stored as a
still picture or with moving pattern, e.g. camera pan or zoom, a paint mask can be
generated.
Note: Storing a key or pattern signal automatically selects the mask store on
the Masks panel and enables the Mask PVW mode. The mask is dis-
payed in the Mask PVW mode as a 1-bit signal only. If you want to exactly
position a mask with softness, simply select the associated keyer on the
Transition panel and switch the mask on.
PaintMode
Masking