Grass Valley DD10 part 3 User Manual
Page 87
4. 7 Trajectory
Diamond digital DD10
307
With normal setting (50%) of the trajectory modifiers TENS, BIAS, CONTI, and
WEIGHT, the following course of movements results:
The following describes the influence of each control separately. For more creative
timeline design you can experiment with the controls and/or combine them.
As the trajectory controls are not effective for the first and the last keyframe, this
example only shows the modification of the values of the second keyframe (act#2).
The procedure is as follows:
–
Press Edit and select the hotkey of this timeline.
–
Verify that View is enabled.
–
Go to act#2 with the function key (act#2 is black).
–
Press Change (a large window appears with the bars of the trajectory modifiers).
–
Set all modifier to 50%.
–
Set modifier of the respective example to the indicated value and press OK
to enter the new value.
–
Press End Edit to end editing.
–
Press hotkey PLAY to play the result.