Grass Valley HD Wireless - Manual (Page 17)

HD Wireless User’s Guide (v6.2) 17
Chapter 1 - Introduction
1.3 System composition
A typical wireless transmission system includes:
• An LDK 5464 wireless camera adapter (WCA) must be combined with:
– An LDK5466/xx HD camera RF module (right adapter cover) for Video Downlink
transmission and
– An LDK 5465/20 HD RF data camera module wireless adapter for data Up link
reception.
• An LDK 4460 antenna management unit (HD AMU). The HD AMU is delivered with an RF
Data Booster mounted in the antenna bracket.
• An LDK 4453 RF Receiver antenna set with three matching video antennas.
• An LDK 4454/60 Data emitter.
• An antenna bracket to mount RF receiver, a data emitter with data booster and antennas.
• A 15 m (50 ft) antenna cable set consisting of three coax cables with BNC connectors and
an RS 422 screened cable with a 9-pin D-sub connector.
• An LDK 4470 wireless control unit (WCU).
• A cable (ordering code 47233914AB) for use with Grass Valley’s Wireless Insight
software.
For a complete Digital Wireless Camera system the following elements must be added:
• An HD LDK camera head and viewfinder
• A broadcast lens
• Triax and network cables
For full remote control:
• An Operational Control Panel (OCP 400) or
• A Multiple Control Panel (MCP 400)
To expand the operating range of the camera an additional AMU with antenna set can be
added to the system.
☞
Note
The camera head, lens, viewfinder, control panels, Triax cables and network cables are not
included with an HD wireless system.