Grass Valley HD Wireless - Manual (Page 23)

HD Wireless User’s Guide (v6.2) 23
Chapter 2 - Installation
2.2.3 Attaching a battery to the camera adapter
Attach a battery pack to the rear of the camera adapter or supply a +12 VDC nominal voltage to
the DC in connector on the rear of the adapter. Due to possible high power consumption a
high-density battery pack is recommended.
Caution
The input voltage at the DC in connector must stay between +11 VDC and +17 VDC.

Always switch off the camera before removing the battery.
Figure 2-4. Camera power supply
Viewfinder battery indicator
The BATT indicator in the viewfinder flashes when battery voltage is low. It lights continuously
when battery voltage is less than 11VDC.
Figure 2-5. Battery indicator
DC in power supply socket
ND/RE BATT MEDIA REC ++ + -
AW2 AW1 AWFL 7.5 5.6 3.2
FOC+
4.7 !
Battery indicator