Grass Valley iControlEdge v.1.20 - Manual (Page 24)

20
iControl Edge Web Monitoring 2
DVR Recording Mode Buttons
In the Remote Control area associated with the Detail Channel Analysis view, if the current device is a DVR,
then the Remote Control area also includes two buttons, used to set the recording mode for this device:
either Manual or Auto-Record (see “Controlling a Manual Set-Top Box or DVR” on page 36).
DVR Info Panel
In the Remote Control area associated with the Detail Channel Analysis view, if the current device is a DVR
in Auto-Record mode, the area shows information about the current channel being recorded and any
channel pending recording.
Note: Setting the recording mode to Manual stops the current recording (if any is in progress)
and clears the recording queue.
Click to select a manual set-top box (or DVR)
Click to switch to manual mode
Red dot indicates recording in progress
Currently recorded channel (number and long name)
Channel pending recording