Configuring an allégro system from the detail view – Grass Valley iControlEdge v.1.20 User Manual
Page 43
Configuring an Allégro System from the Detail View
39
Probe control panel in the Configuration window (panel for a DEC-1002 video probe shown)
3. View the current settings and modify them as needed.
4. Click the
button at the top-right corner of the window to close it. Alternatively, click a Channel
Selector button or another CONFIGURATION button in the Multi-Channel Monitoring Area.
Configuring an Allégro System from the Detail View
To configure the Allégro system associated with the Detailed Channel Analysis area:
•
On the toolbar below the large viewer, click Configure.
The Allégro-1 System Status page appears in the Detailed Channel Analysis area:
See also:
For more information about video and audio probe configuration, see the documentation
packaged with your specific Densité probes.