Grass Valley iMC-Panel-100 v.7.0.9.0 - Manual (Page 111)

Master Control • iMC-Panel-100 Operator’s Guide 99
6. Operation
Chapter 6 describes many of the operating procedures and operating characteristics of the iMC-
Panel-100 when it is used to control an Imagestore 750. It presents the following topics:
• General Information
• Performing Transitions
• Transition Options
• Working with Transition Type and Rate
• Working with DSKs
• Working with DVEs
• Working with XG Layers
• Working with Voice-Overs
• Working with Audio Monitors
• Working with Audio Meters
• Working with Audio Levels
• Shuffling Audio Channels
• Working with Multiple Channels
• Working with the Aux Buttons
• Working with a Monitor Wall
• Using the Panel Menu
• Fade to Black
• Fade to Silence
• Updating Configuration Settings
• Panel Startup and Shutdown
General Information
About Colors
The physical buttons of the iMC-Panel-100 are large having LCD legends in several colors. Each
button has 3 line of text, up to 8 characters per line. Although not physical, menu buttons also show
3 lines of 8 characters, in color.
LCD buttons are used for the configurable buttons and for the preset and program buses.
Note Throughout this guide, and especially in this chapter, we use sample source names,
effect names, and menu lists for illustration. The names on your panel will differ.