Grass Valley Jupiter v.1.0.0 - Manual (Page 18)

10 Jupiter AccuSwitch Soft Panels and Visual Status Display Instruction Manual
Section 1 — Soft Panel Introduction
Assigning a Function Key
The Multi-Level XY Soft panel application allows you to assign a Function
key for the
Take button. The function key could then be used to perform
Takes.
To Assign a function key:
1. Go to Assign Function Key.... from the Settings menu (Settings > Assign
Function Key....). The Assign Function Key dialog will then appear.
Figure 11. Assign Function Key Dialog
2. Select a Function key from the drop-down list. Any function key
between F1 and F12 can be assigned.
3. Click OK to save the selection.
Setting Password Protection
If desired, a password can be used to protect the settings file, see Figure 12 .
This setting is optional.
To set password protection:
1. Select Change/Set Password from the Settings menu (Settings >
Change/Set Password..).
Figure 12. Password Dialog