Grass Valley Jupiter v.1.0.0 - Manual (Page 22)

14 Jupiter AccuSwitch Soft Panels and Visual Status Display Instruction Manual
Section 1 — Soft Panel Introduction
Control Panel Sets
The router sources and destinations for the Soft Panels are specified by cre-
ating a CP Input/Output sets of type of CPESXTND for device type
CPESXTND, or CP-3800 for the device type CP-ESLAN. Soft panels use
level and sequence sets of type CP-3800.
These sets are assigned to each panel using the MPK Devices table.
The CP Input and Output sets are also the source of the eight-character
mnemonics displayed on the panel.
VSD Control panel sets must contain all Sources, Destinations, and Levels
to display the status correctly.
Compiling
Before the panel can be used, the edited Jupiter set must be compiled and
the appropriate configuration set made active using the Control Center. For
more information, please refer to “Configurator” in the Jupiter CM-4000
Installation and Operating manual.