Installing the serial touch driver – Elo TouchSystems 1229L(WWW) User Manual
Page 33
2-28 Elo Entuitive Touchmonitor User Guide
Installing the Serial Touch Driver
Installing the Serial Touch Driver for Windows XP, Windows 2000, Me,
95/98 and NT 4.0
NOTE:
For Windows 2000 and NT 4.0 you must have administrator access rights to install the
driver.
1
Insert the Elo CD-ROM in your computer’s CD-ROM drive.
2
If the AutoStart feature for your CD-ROM drive is active, the system automatically detects the
CD and starts the setup program.
3
Follow the directions on the screen to complete the driver setup for your version of Windows.
4
If the AutoStart feature is not active:
5
Click Start > Run.
6
Click the Browse button to locate the EloCd.exe program on the CD-ROM.
7
Click Open, then OK to run EloCd.exe.
8
Follow the directions on the screen to complete the driver setup for your version of Windows.