Credit card reader – Elo TouchSystems 1229L(WWW) User Manual

Page 9

Advertising
background image

1-4 Elo Entuitive Touchmonitor User Guide

Specifications

Sensor

SecuGen FOR

Image Capture Speed

600ms / frame

Image Transfer Speed

500Byte / ms

Pixel Resolution

356 x 292

USB Signaling Type

Full Speed Type

Theory of Operation

The USB host initiates communication with the FDU01 using operation commands (Sensor LED On,

Fingerprint Capture Start and Stop). Fingerprint data are then captured by the CMOS sensor at a total

image size of 356 x 292 with 8-bit gray level. The image frame transfer speed is 500 bytes/ms. It

takes about 600 milliseconds to send one frame of image data over USB protocols.

FDU01 uses the SecuGen FOR (Fingerprint Optic Reader).

Sensor Specifications

Sensor

CMOS Image Sensor

Resolution

500dpi

Verifying Time

< 1sec

Image Capture Error Rate

< 0.1%

Life Time Typically

40,000Hrs

Credit Card Reader

There is a serial credit card reader and a USB credit card reader.

The USB version is available in HID and Keyboard emulation versions. The reader reads all three

stripes on a standard credit card or drivers license. A green LED provides the operator with continu-

ous status of the reader operations.

Reference Standards-Conform to

International Standards Organization, American National

applicable standards

Standards Institute, California Drivers License, American

Association of Motor Vehicle Administrators

Message Format

ACCII

Card Speed

3 to 50 IPS

MTBF

Electronics 125,000 hrs; Head 1,000,000 passes

Advertising