Elo TouchSystems 1229L(WWW) User Manual
Page 35
2-30 Elo Entuitive Touchmonitor User Guide
Installing the USB Touch Driver
Installing the USB Touch Driver for Windows XP,
Windows 2000, Me and 98
1
Insert the Elo CD-ROM in your computer’s CD-ROM drive.
If Windows XP, Windows 2000,Windows 98, or Windows Me starts the Add New Hardware
Wizard:
2
Choose Next. Select “Search for the best driver for your device (Recommended)” and choose
Next.
3
When a list of search locations is displayed, place a checkmark on “Specify a location” and use
Browse to select the \EloUSB directory on the Elo CD-ROM.
4
Choose Next. Once the Elo TouchSystems USB touchscreen driver has been detected, choose
Next again.
5
You will see several files being copied. Insert your Windows 98 CD if prompted. Choose Finish.
If Windows XP, Windows 2000,Windows 98, or Windows Me does not start the Add New Hardware
Wizard:
NOTE:
For Windows XP and Windows 2000 you must have administrator access rights to install
the driver.
1
Insert the Elo CD-ROM in your computer’s CD-ROM drive.
If the AutoStart feature for your CD-ROM drive is active, the system automatically detects the
CD and starts the setup program.
2
Follow the directions on the screen to complete the driver setup for your version of Windows.
If the AutoStart feature is not active:
1
Click Start > Run.
2
Click the Browse button to locate the EloCd.exe program on the CD-ROM.
3
Click Open, then OK to run EloCd.exe.
4
Follow the directions on the screen to complete the driver setup for your version of Windows.