Grass Valley Kaleido-X16 Quick Start v.7.80 - Manual (Page 20)

8
Setting Up Your Kaleido-X16 Multiviewer
Physical Setup
2 Right-click anywhere on the monitor wall, point to Monitor wall (if you clicked a
monitor), and then click Display resolution:
The Display Resolution window appears:
• If you would like the system to automatically select a resolution based on
information from the connected display, select Use detected monitor resolution.
• If you would like to manually set (and fix) the resolution, select the desired
resolution from the Default DVI resolution list:
3 Click OK.
The output resolution is adjusted accordingly.