Grass Valley Switcher Products - Manual (Page 87)

Switcher Products — Protocols Manual87
Editor Commands
keyframe. The video will remain at that position until one of the following
occurs:
• The effect runs long enough for the field count to pass zero
• The editor successively trims the field count in a positive direction until
zero is passed
• The editor writes a positive, non-zero field count to the switcher
Note Kalypso and Zodiak currently ignore the speed parameter in the Timeline Run
command. Run always causes the effect to run at +100% speed.
Examples
08 0C CF FF FF 00 00 07 80 ==> Trim all DPM levels by –1 field.
08 0C CE 00 1E 00 00 00 0E ==> Set the 3 M/Es to 30 fields.
08 0C 4F 00 01 00 00 00 0E ==> Run the effects for all 3 M/Es.