Grass Valley LUMO Series - Manual (Page 19)

11
LUMO
User Manual
4 Pull the door mounting brackets back out of the frame, and re-install the door onto the
brackets.
5 Be sure to close the door before operating the LUMO system, to ensure proper ventilation.
Replacing the Frame Ventilation Fan
In case of failure of the main cooling fan on the rear of the frame, replace it according to the
following steps.
1 Procure a replacement fan. It is available from Miranda as part #1974-1500-100
2 Remove the defective fan from the frame:
• Disconnect the fan power by grasping the connector and pulling straight out.
• Remove the two screws that secure the fan unit to the frame and pull the fan unit away
from the frame.
• Retain the screws, as they will be used with the replacement fan.