Grass Valley LUMO Series - Manual (Page 20)

12
LUMO Housing Frame
Specifications
3 Install the replacement fan:.
• Use the two screws that were retained when the old fan was removed to install the new
fan onto the rear panel. See the note above.
• Grasp the power connector attached to the fan assembly, and push it onto the power
outlet located to the left of the fan on the rear panel
Specifications
MECHANICAL
Dimensions 1RU x 17.60” W (447 mm) x 10” D (254 mm) without fiber support
1RU x 17.60” W (447 mm) x 20.25” D (515 mm) with fiber support
with connectors
Weight: 8.9 lbs (4.45 kg) with 1 PSU and controller card installed
POWER
Rating: 100-240V~
0.83 - 0.42 A
50/60 Hz
150 W max
Ambient Temperature: 40° C max
COOLING
Fans: 1 on frame, removable
COMMUNICATION
Connectors: RJ45 (2)
Compliant to: 10BaseT/100BaseTx