Grass Valley PDR v.2.1 - Manual (Page 75)

Input and Output Mapping
Profile Family 59
Figure 38. Audio Configuration dialog box, Output Mapping tab
The columns are the mapping grid. The examples in Figure 37 and Figure 38
illustrate the system with a PAC 208 chassis allowing the selection of analog
channels 1–8 and digital channels 9–16. A PAC 216 chassis, however, provides
16 analog inputs and 16 digital inputs. For the PAC 208, rows 9 through 16 of
the analog channel column, and rows 1 through 8 of the digital channel column,
are cross-hatched to indicate that these channels are not selectable. In Figure 38,
in the column labeled AES/EBU, rows 9–16 appear dimmed, indicating that
this audio type is always mapped and cannot be unmapped. Attempting to
remap this section results in an error message.
The number of columns in the mapping grid depends on the number of possible
input or output audio types that may be mapped to the disk recorder channels.
The grid is used for selecting which of the possible input or output audio