Grass Valley PVTV NEWS Rev.4.02 - Manual (Page 35)

31 STUDIO NEWS
Building a Fixed Position DVE Hotkey
1
. Select a blank
hotkey. When
selected, the key
will illuminate.
2
. Select the
Fade transition
from the transition
list.
3
. Select the + (plus) key to
add that transition to the hot-
key. This will open the Transi-
tion Setup dialog box.
4
. Select DVE ON.
5
. Double-click the desired DVE
Effect (example: Warp). The DVE
Setup dialog box appears.
6
. Select the
desired effects
and attributes for
the DVE.
7
. Use the sliders to manipulate the position of the DVE, in
this case, Warp.
8
. Select OK. The DVE
Hotkey will save settings.