Polaris 2016 600 Switchback Assault 144 - Manual (Page 60)

58
THE PERFECT FIT
Engine Stop Switch Alignment
1. Slightly loosen the set screw on
the bottom of the housing.
2. Move the switch to the desired
position.
CAUTION! The stop switch must be
positioned in an easily accessible location.
3. Tighten the screw to specification.
Do not over-torque.
Torque: 12 in-lbs (1.4 Nm)
Handlebar Hook Alignment
1. Slightly loosen the clamping screw. Do
not remove the screw.
2. Rotate the hook to the desired position.
3. Tighten the screw to specification. Do
not over-torque.
Torque: Aluminum Bars 10 ft-lbs (13.5 Nm)
Torque: Steel Bars 18 ft-lbs (24 Nm)
Stop Switch
Set Screw
Loosen Clamping
Screw
(do not remove)