Polaris 2016 600 Switchback Assault 144 - Manual (Page 61)

59
THE PERFECT FIT
Handlebar Adjustments
Handlebar Angle
1. Loosen the four bolts on the
top of the adjuster block. If
necessary, pry the blocks
apart with a screwdriver.
2. Adjust the handlebar
forward or rearward to the
desired angle.
3. Be sure the handlebar, brake
lever and throttle lever
operate smoothly and do not
hit the gas tank, windshield
or any other part of the
machine when turned fully
to the left or right. If
necessary, adjust the left and
right hand controls. See
page 57.
4. Tighten the bolts to specification. Do not over-torque.
Torque: 7 ft-lbs (9.5 Nm)
Loosen
Bolts