Maintenance, Engine oil – Polaris 2008 Ranger Crew User Manual

Page 71

Advertising
background image

68

MAINTENANCE

Engine Oil

Always check and change the oil at the intervals outlined in the Periodic

Maintenance Chart beginning on page 60. Always use the recommended

engine oil.

Oil Check

The oil dipstick and fill tube is

located on the engine.
1. Position the vehicle on a level

surface.

2. Apply the brakes. Start the

engine and allow it to idle for

20-30 seconds. Stop the engine.

3. Lift the lever lock to remove the

dipstick. Wipe it dry with a clean

cloth.

4. Reinstall the dipstick completely,

but do not lock it. The dipstick

must be screwed completely in

to keep the angle and depth of

the stick consistent.

5. Remove the dipstick and check

the oil level. Maintain the oil

level in the safe range. Do not

overfill.

NOTE:

Due to the dipstick entry angle

into the crankcase, the oil level

will read higher on the bottom

side of the dipstick. Always

read the level on the upper sur-

face of the dipstick.

6. After reinstalling the dipstick, be

sure to seat the lever lock.

Safe

{

Safe

Range

Check Level

on Top Side

Dipstick

Advertising