Polaris 2008 Ranger Crew - Manual (Page 77)

74
MAINTENANCE
Gearcases
Rear Gearcase
Always check and change the rear gearcase oil at the intervals outlined
in the Periodic Maintenance Chart beginning on page 60.
Refer to the Gearcase Specifications Chart on page 70 for recommended
lubricants, capacities and torque specifications. See page 110 for the
part numbers of Polaris products.
The rear gearcase fill plug is on the driver's side of the rear gearcase.
Oil Check
Maintain the oil level even
with the bottom thread of
the fill plug hole.
1. Position the vehicle on
a level surface.
2. Remove the fill plug.
Check the oil level.
3. Add the recommended
oil as needed.
4. Reinstall the fill plug.
Torque to specification.
Oil Change
1. Remove the fill plug.
2. Place a drain pan under the drain plug. Remove the drain plug.
3. Drain the oil. Dispose of used oil properly.
4. Clean the drain plug. Reinstall the drain plug. Torque to specifica-
tion.
5. Add the recommended oil.
6. Reinstall the fill plug. Torque to specification.
7. Check for leaks.
Fill Plug
Drain Plug