Polaris 2008 Ranger Crew - Manual (Page 94)

91
MAINTENANCE
Tires
Tire Tread Depth
Always replace tires
when tread depth is
worn to 1/8" (3 mm)
or less.
Axle and Wheel Nut Torque Specifications
Inspect the following items occasionally for tightness, and if they've
been loosened for maintenance service.
NOTE: Do not lubricate the stud or the lug nut.
WARNING
Operating your vehicle with worn tires will increase the possibility of skidding,
loss of control and an accident, which could result in serious injury or death.
Always replace tires when the tread depth measures 1/8" (3 mm) or less.
Improper tire inflation or the use of non-standard size or type of tires may
adversely affect vehicle handling, which could result in vehicle damage or
personal injury. Always maintain proper tire pressure. When replacing tires,
always use original equipment size and type.
Nut Type Location Nut Torque
Lug Nut Front and Rear 90 ft. lbs. (122 Nm)
2-Piece Flange
Nut
Front and Rear 35 ft. lbs. (47 Nm)
Spindle Nut Front 70 ft. lbs. (95 Nm)
Hub Retaining Nuts Center and Rear 110 ft. lbs. (150 Nm)
1/8" (3 mm)