HEIDENHAIN TNC 122 User Manual - Manual (Page 53)

8 User Parameters
TNC 122 53
8
User Parameters
With user parameters you define the way the TNC operates in
various situations. You can change user parameters without first
having to enter a code number.
Selecting user parameters
Mode of operation: any
C O D E N O . =
Page to EDIT USER PARAM.
Press MOD to select the user parameters.
MOD
E D I T U S E R P A R A M
Call the list of user parameters.
ENT
To change user parameters
⇒ ⇒ ⇒ ⇒ ⇒ Use the vertical arrow keys to select the desired user
parameter.
⇒ ⇒ ⇒ ⇒ ⇒ Enter the new parameter value.
⇒ ⇒ ⇒ ⇒ ⇒ Confirm your entry with ENT.
To leave the user parameters
⇒ ⇒ ⇒ ⇒ ⇒ Press the DEL key to leave the user parameters.
The changes are effective immediately.