HEIDENHAIN TNC 122 User Manual User Manual
Page 54
8
User Parameters
54
TNC 122
User Parameters in the TNC 122
Parameters whose functions are determined by the machine tool builder
The machine tool builder determines the function of the machine
parameters:
•
MP4310.0
•
MP4310.1
Sequence for crossing the reference marks
MP1340.0: 1st axis
X axis:
1
MP1340.1: 2nd axis
Y axis:
2
MP1340.2: 3rd axis
Z axis:
3
No reference mark evaluation:
0
Programming station setup
MP7210
TNC with machine:
0
TNC as a programming station with active PLC:
1
TNC as programming station with inactive PLC:
2
Dialog language
MP7230
German:
0
English:
1
French:
2
Italian:
3
Spanish:
4
Position display in the tool axis
MP7285
Display the position of the tool datum:
0
0
0
0
0
Display the position of the tool point:
1
Select the position display
MP7322
Actual position:
0
Servo lag:
1
Reference position:
2
Enable continuing traverse with the direction keys
MP7680
Continuing traverse disabled:
0
Continuing traverse enabled:
1