HEIDENHAIN TNC 407 (243 020) Service Manual - Manual (Page 13)

HEIDENHAIN
31-O
SERVICE MANUAL TNC
01.09.1995
7.2
Display (blinking) C a u s e
23
24
25
26
27
Accumulators not loaded on “open parentheses”
or command has been
programmed, although neither the word nor the logic
accumulator has been gated or loaded.)
Incorrect type of the parentheses result different
type has been calculated in the parentheses from that
which was defined in the “open parentheses”
command, i.e. logic instead of word or vice versa.)
Conditional jump with incorrect logic accumulator
conditional jump has been programmed, although the
logic accumulator does not contain a definite value.)
Empty CASE-instruction
“END-CASE” missing
Notes: