HEIDENHAIN TNC 407 (243 020) Service Manual - Manual (Page 87)

SERVICE MANUAL TNC
Issue:
01.09.1995
Page 73
15.4.3 Machine Parameter Input for Multipoint Axis Error Compensation
Press Key Function
q
Switch TNC to operating mode EDITING
(key on
Prepare TNC for code number input
Enter code number, acknowledge with ENT
Activate data transfer menu
Press arrow key to enter the directory of the external
data medium
If necessary: select desired compensation value list
by pressing the arrow keys
Enter name of compensation value list (ASCII or
numerical keys)
Soft key TNC for data input
Soft key to end data transfer menu
TNC is in the operating mode EDITING