HEIDENHAIN ND 720 v.3 - Manual (Page 62)

62
Output Structure of Compensation-Value Table
A separate compensation-value table is prepared and output for each axis to be corrected.
Line 1
Each compensation-value output starts with the starting character < * > ( HEX: 0x2A)
* <CR> <LF>
3 characters
Line 2
Output of model designation and unit of measure
N D - 7 6 0 M M <CR> <LF>
13 characters 5 characters 2 characters
Type of display unit left-aligned Unit of measure End
Line 3
Output of axis to be corrected
A X I S X = 0 <CR> <LF>
13 characters 3 ch. 6 characters 2 characters
Axis to be corrected left-aligned Sep. block Axis value End
Right-aligned
Output
S
tructure
of
C
ompensation-Value
Table
Bateil2.pm6 27.03.2002, 12:09 62