HEIDENHAIN ND 730 v.3 - Manual (Page 22)

22
Taper Calculator
3 0
0 1
2 0
DIA. RIGHT
Enter value, e.g. 10 mm, confirm with ENT.
DIA. LEFT
Enter value, e.g. 20 mm, confirm with ENT.
LENGTH
Enter value, e.g. 30 mm, confirm with ENT.
ANGLE = 9.462
The result is displayed in the message field.
Exit the taper calculator.
You can change entered values later by selecting them with
the ENT key or the TOOL key.
ENT
ENT
ENT
SPEC
FCT
or
730_770t3.pm6 21.07.2004, 08:36 22