Remote operation from a pc, 1 oper ation 2.1 operation – HEIDENHAIN ND 1300 Addendum User Manual
Page 16
16
2 Operation
2.1 Oper
ation
2.1 Operation
Remote Operation from a PC
The ND 1300 RS-232 serial port supports bi-directional
communications. Measured data value output—display values or
probing functions—can be requested and exported to an external
device. Requests can be made by using remote key commands from
a PC using a serial communications program.
Refer to "Chapter 10: Communication" in the User’s Guide for
information on connecting a computer and sending data over
the RS-232 port.
Remote Operation Example
To simulate pressing the Print button:
type @PRINT at the command line
Press the ENTER key on the computer keyboard
The following key commands are available for operating the ND 1300
from a PC:
Remote keypad commands are only available if a remote
keypad is attached
Command
Function
@0
Key 0
@1
Key 1
@2
Key 2
@3
Key 3
@4
Key 4
@5
Key 5
@6
Key 6
@7
Key 7
@8
Key 8
@9
Key 9
@+
Key +
@-
Key _
@.
Key .
@ENTER
Key ENTER
@FINISH
Key FINISH