HEIDENHAIN PT 855 for Milling - Manual (Page 53)

I - 4 Programming POSITIP
POSITIP 855 Operating Instructions 51
Transferring positions: Teach-in mode
Teach-in programming offers the following three options:
• Enter nominal position, transfer nominal position to program,
move to positions by traversing to display value zero:
TEACH-IN / DISTANCE TO GO
• Move to a position and transfer the actual value to a program:
TEACH-IN / ACTUAL POSITION
• Probe workpiece edges and transfer probed positions:
TEACH-IN / EDGE FINDER
You can change transferred position values with
TEACH-IN /
PROGRAM
.
Preparation
ä With
Program number
select the program you want to trans-
fer positions into.
ä Select the tool data from the tool table.
or
äÿEnter the length and diameter of the edge finder stylus.
Overview of functions
Function Soft Key/Key
Abort and return to the
Teach-In main menu
Go to the previous program block
Go to the next program block
Delete the current block