HEIDENHAIN SW 68894x-03 - Manual (Page 502)

502 Tool and technology database
7.
2 T
ool edit
or
7.2 Tool editor
Sorting and filtering the tool list
In the tool list, the CNC PILOT displays important parameters and the
tool descriptions. You can recognize the tool type and the tool
orientation from the provided sketch of the tool point.
You can navigate within the tool list with the arrow keys and PgUp/PgDn
to check the entries.
Displaying the entries of only one tool type
 Press the soft key and select the tool type in the
following soft-key rows.
 The CNC PILOT creates a list containing only tools of the selected
type.
Filtering the tool list
Press the More filters soft key.
Press the Filter orientatn. soft key. The CNC
PILOT switches the display between tools of the
selected orientation.
Press the Filter assignment soft key. The CNC
PILOT switches between tools in the tool carrier
(turret) and unassigned tools.
Press the Filter details soft key. The CNC PILOT
displays a pop-up window containing the available
selection criteria.
Define the filter criteria.
Press the OK soft key.