HEIDENHAIN CNC Pilot 4290 V7.1 Description of B and Y axes - Manual (Page 99)

HEIDENHAIN CNC PILOT 4290 99
1
.16 TURN PLUS: YZ Plane Cont
ours
YZ plane: Linear drilling pattern
This function defines a linear drilling pattern in the YZ plane.
Parameters
Y
Starting point of pattern in Cartesian coordinates
Z Starting point of pattern in Cartesian coordinates
a Starting point of pattern in polar coordinates (reference
angle: positive Z axis)
P Starting point of pattern in polar coordinates
Q Number of holes
J End point of pattern in Cartesian coordinates
K End point of pattern in Cartesian coordinates
Ji Distance in Y direction between two holes
Ki Distance in Z direction between two holes
b Angle to longitudinal axis of pattern (reference: Z axis)
L Total length of pattern
Li Distance between two holes (pattern distance)
Description of the hole (see “XY plane: Single hole” on
page 77)