HEIDENHAIN TNC 320 (34055x-06) ISO programming - Manual (Page 326)

Programming: Multiple Axis Machining
11.2 The PLANE Function: Tilting the Working Plane (Software Option 1)
11
326
TNC 320 | User's Manual for DIN/ISO Programming | 5/2013
Input parameters
Axis angle A?: Axis angle
to which the A axis
is to be tilted. If entered incrementally, it is the
angle
by which the A axis is to be tilted from its
current position. Input range: –99999.9999° to
+99999.9999°
Axis angle B?: Axis angle
to which the B axis
is to be tilted. If entered incrementally, it is the
angle
by which the B axis is to be tilted from its
current position. Input range: –99999.9999° to
+99999.9999°
Axis angle C?: Axis angle
to which the C axis
is to be tilted. If entered incrementally, it is the
angle
by which the C axis is to be tilted from its
current position. Input range: –99999.9999° to
+99999.9999°
Continue with the positioning properties, See
"Specifying the positioning behavior of the PLANE
function", page 327
Abbreviations used
Abbreviation Meaning
AXIAL
In the axial direction
NC block
5 PLANE AXIAL B-45 .....