HEIDENHAIN TNC 320 (34055x-06) ISO programming - Manual (Page 466)

Tables and overviews
16.3 Technical Information
16
466
TNC 320 | User's Manual for DIN/ISO Programming | 5/2013
Specifications
Components
■
Operating panel
■
TFT color flat-panel display with soft keys
Program memory
■
2 GB
Input resolution and display
step
■
Up to 0.1 µm for linear axes
■
Up to 0.0001° for rotary axes
Input range
■
Maximum 999 999 999 mm or 999 999 999°
■
Linear in 4 axes
■
Circular in 2 axes
Interpolation
■
Helical: superimposition of circular and straight paths
■
Helical: superimposition of circular and straight paths
Block processing time
3-D straight line without radius
compensation
■
6 ms
■
Position loop resolution: Signal period of the position encoder/1024 Axis feedback control
■
Cycle time of position controller: 3 ms
■
Cycle time of speed controller: 200 µs
Range of traverse
■
Maximum 100 m (3937 inches)
Spindle speed
■
Maximum 100 000 rpm (analog speed command signal)
Error compensation
■
Linear and nonlinear axis error, backlash, reversal peaks during circular
movements, thermal expansion
■
Stick-slip friction
■
One each RS-232-C /V.24 max. 115 kilobaud
■
Expanded interface with LSV-2 protocol for external operation of the
TNC over the interface with HEIDENHAIN software TNCremo
Data interfaces
■
Ethernet interface 100 Base T approx. 40 to 80 Mbps (depending on
file type and network utilization)
■
3 x USB 2.0
Ambient temperature
■
Operation: 0 °C to +45 °C
■
Storage: –30 °C to +70 °C