HEIDENHAIN TNC 320 (34055x-06) ISO programming - Manual (Page 447)

Configure HR 550 FS wireless handwheel 15.10
15
TNC 320 | User's Manual for DIN/ISO Programming | 5/2013
447
Statistical data
Under
Statistics, the TNC displays information about the
transmission quality.
If the reception quality is poor so that a proper and safe stop of the
axes cannot be ensured anymore, an emergency-stop reaction of
the wireless handwheel is triggered.
The displayed value
Max. successive lost indicates whether
reception quality is poor. If the TNC repeatedly displays values
greater than 2 during normal operation of the wireless handwheel
within the desired range of use, then there is a risk of an undesired
disconnection. This can be corrected by increasing the transmitter
power or by changing to another channel with less radio traffic.
If this occurs, try to improve the transmission quality by selecting
another channel (See "Setting the transmission channel", page 446)
or by increasing the transmitter power (See "Selecting the
transmitter power", page 446).
To display the statistical data, proceed as follows:
Press the MOD key to select the MOD function
Scroll through the soft-key row
To select the configuration menu for the wireless
handwheel, press the SET UP WIRELESS
HANDWHEEL soft key: The TNC displays the
configuration menu with the statistical data