Manual operation and setup, Positioning with manual data input (mdi) – HEIDENHAIN TNC 410 ISO Programming User Manual
Page 12
VIII
2.1 Switch-on, Switch-Off ..... 18
Additional functions for the TNC 426, TNC 430 ..... 19
2.2 Moving the Machine Axes ..... 20
To traverse with the machine axis direction buttons: ..... 20
Traversing with the HR 410 electronic handwheel ..... 21
Incremental jog positioning ..... 22
2.3 Spindle Speed S, Feed Rate F and Miscellaneous Functions M ..... 23
Changing the spindle speed and feed rate ..... 23
2.4 Datum Setting (Without a 3-D Touch Probe) ..... 24
2.5 Tilting the Working Plane (not TNC 410) ..... 26
Application, function ..... 26
Traversing the reference points in tilted axes ..... 27
Setting the datum in a tilted coordinate system ..... 27
Datum setting on machines with rotary tables ..... 28
Position display in a tilted system ..... 28
Limitations on working with the tilting function ..... 28
To activate manual tilting: ..... 29
3.1 Programming and Executing Simple Machining Operations ..... 32
Positioning with Manual Data Input (MDI) ..... 32
Protecting and erasing programs in $MDI ..... 35