HEIDENHAIN TNC 410 ISO Programming - Manual (Page 420)

394 12 MOD Functions
12.5 Set
ting
th
e D
a
ta Int
e
rf
ace f
o
r th
e TNC 41
0
Data transfer between the TNC 410 and
TNCremo
Ensure that:
n The TNC is connected to the correct serial port on your PC.
n The data transfer speed set on the TNC for LSV2 operation is the
same as that set on TNCremo.
Once you have started TNCremo, you will see a list of all of the files
that are stored in the active directory on the left of the window. Using
the menu items <Directory>, <Change>, you can change the active
directory or select another directory. To start data transfer at the TNC
(see “Data transfer to or from an external data medium” on page 69),
select <Connect>, <File server>. TNCremo is now ready to receive
data.