HEIDENHAIN iTNC 530 (340 49x-03) Pilot - Manual (Page 24)

24
Path functions
Inserting a Chamfer CHF between Two
Straight Lines
8 Chamfer side length
8 Feed rate F
7 L X+0 Y+30 RL F300 M3
8 L X+40 IY+5
9 CHF 12 F250
10 L IX+5 Y+0
„ You cannot start a contour with a CHF block.
„
The radius compensation before and after the CHAMFER
block must be the same.
„ An inside chamfer must be large enough to accommodate
the called tool.
X
Y