HEIDENHAIN iTNC 530 (340 49x-03) Pilot - Manual (Page 99)

99
Special Cycles
ORIENTED SPINDLE STOP (Cycle 13)
8 CYCL DEF: Select Cycle 13 ORIENTATION
8 Enter the orientation angle referenced to the angle reference axis of
the working plane:
Input range: 0° to 360°
Input resolution: 0.1°
8 Call the cycle with M19 or M20.
The TNC and the machine tool must be specially prepared by
the machine tool builder for the ORIENTED SPINDLE STOP.
12 CYCL DEF 13.0 ORIENTATION
13 CYCL DEF 13.1 ANGLE 90
X
Y
Z