HEIDENHAIN iTNC 530 (340 49x-03) smarT.NC Pilot User Manual
Page 126
126
Defining
Mach
ining
Posit
io
ns
Defining a pattern
8
Select via soft key the pattern to be defined.
8
Define the required entry parameters in the form. Select the next input
field with the ENT key or the arrow down key.
8
Press the END key to save the entered parameters.
After you have entered a pattern via a form, smarT.NC displays this
pattern symbolically as an icon on the left side of the screen in the tree
view (
1
).
The pattern is displayed graphically in the bottom right quarter of the
screen (
2
) immediately after the entry parameters have been saved.
After opening the tree view with the right arrow key, you can select any
point within the pattern you’ve created with the arrow down key. The
point selected on the left is shown in blue in the graphic on the right by
smarT.NC (
3
). For informational purposes, the Cartesian coordinates of
the currently selected point are shown in the top right quarter of the
screen (
4
).
1
1
1
2
1
3
1
4