HEIDENHAIN TNC 620 (340 56x-03) - Manual (Page 455)

HEIDENHAIN TNC 620 455
15.5 Pr
ogr
am Run
Moving the machine axes during an interruption
You can move the machine axes during an interruption in the same
way as in the Manual Operation mode.
Application example:
Retracting the spindle after tool breakage
U Interrupt machining
U Enable the machine axis-direction keys: Press the MANUAL
TRAVERSE soft key
U Move the axes with the machine axis-direction keys
On some machines you may have to press the machine
START button after the MANUAL OPERATION soft key to
enable the axis-direction keys. Refer to your machine
manual.