HEIDENHAIN TNC 640 (34059x-01) ISO programming User Manual
Page 26
26
13.1 Switch-On, Switch-Off ..... 364
13.2 Moving the Machine Axes ..... 367
Moving the axis using the machine axis direction buttons ..... 367
Incremental jog positioning ..... 368
Traversing with the HR 410 electronic handwheel ..... 369
13.3 Spindle Speed S, Feed Rate F and Miscellaneous Functions M ..... 370
Changing the spindle speed and feed rate ..... 371
Activating feed-rate limitation ..... 372
13.4 Datum Setting without a 3-D Touch Probe ..... 373
Workpiece presetting with axis keys ..... 374
Datum management with the preset table ..... 375
13.5 Using the 3-D Touch Probe ..... 381
Selecting touch probe cycles ..... 381
Writing the measured values from touch probe cycles in datum tables ..... 382
Writing the measured values from touch probe cycles in the preset table ..... 382
13.6 Calibrating a 3-D Touch Probe ..... 383
Calibrating the effective length ..... 384
Calibrating the effective radius and compensating center misalignment ..... 385
Displaying calibration values ..... 386
13.7 Compensating Workpiece Misalignment with a 3-D Touch Probe ..... 387
Measuring a basic rotation ..... 388
Saving a basic rotation in the preset table ..... 388
Displaying a basic rotation ..... 388