Epson AVR-687 - Manual (Page 32)

Basic Operation Basic Operation
ENGLISH
29
ENGLISH
• Select “DEFAULT Y/N” and press F F to reset all the settings.
Press D D H H to select the item, then press F F G G to set.
The surround parameter switches in the following order each
time SURROUND PARAMETER is pressed for the different surround
modes.
• When the MONO MOVIE, ROCK ARENA, JAZZ CLUB and
VIDEO GAME mode:
Press ENTER or SURROUND PARAMETER .
Selecting the DSP surround simulation
Press SURROUND PARAMETER .
Press [DSP SIMULATION] .
5CH/7CH STEREO MONO MOVIE
JAZZ CLUB
ROCK ARENA
MATRIX VIDEO GAME
VIRTUAL
The 5CH/7CH STEREO mode can be selected directly by pressing
[5CH/7CH STEREO].
1
2
3
4
ROOM SIZE:
Adjust the imaginary size of the recreated sound field space. (Does
not express size of room in which played.)
There are five parameters: “small”, “med.s”, “medium”, “med.l”
and “large”.
SB CH OUT
• ON:
Surround back channel played.
• OFF:
Surround back channel not played.
EFFECT LEVEL:
Adjust the strength of the surround effect.
DELAY TIME: (MATRIX mode only)
Adjust the delay time between “0 ms” and “110 ms”.
ROOM SIZE EFFECT LEVEL
DEFAULT SURROUND BACK
TONE DEFEAT
TONE DEFEAT DEFAULT
• When the VIRTUAL mode:
If you do want the bass and treble to be adjusted, turn off the
tone defeat mode.
DELAY
DEFAULT SURROUND BACK
TONE DEFEAT
• When the MATRIX mode:
¢ To operate the surround mode and the surround
parameters from the remote control unit
¢ Operating the surround mode and the surround
parameters from the main unit’s panel
Use <SELECT/ENTER> to select the surround mode.
DIRECT STEREO
MONO MOVIE
DTS NEO:6 5CH/7CH STEREO NEURAL SURROUND
MATRIX VIRTUAL SURROUND
DOLBY PRO LOGIC IIx
ROCK ARENA JAZZ CLUB
VIDEO GAME
1
To select the surround mode while adjusting the surround
parameters, tone defeat or tone control, press <SURROUND
MODE>, then operate the selector.
Perform steps 2 to 4 under “Selecting the DSP surround
simulation”. 2
About the button names in this explanation
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
[CH SELECT],
ENTER
D H F G
D H F G
SURROUND
PARAMETER
[DSP SIMULATION]
ENTER
[5CH/7CH STEREO]
<SURROUND MODE>,
SURROUND PARAMETER
<POWER> D H
F G,
SELECT/ENTER <PRESET •> <ON/STANDBY>