Epson AVR-687 - Manual (Page 36)

ENGLISH
33
ENGLISH
Advanced Operation
The night mode can be set when playing Dolby Digital sources. The
dialogues are easier to hear at night and when listening with the
volume low.
Press [NIGHT] .
Night mode
• Canceling night mode:
Press [NIGHT] again.
• When the night mode is set to “ON”, the “D.COMP” surround
parameter can not be selected.
User mode function
The AVR-687 is equipped with a function for storing the selected input
source, the auto surround mode and input mode in the memory and
selecting these settings when you want to use them.
The following are stored in the memory:
q q Currently set input source
w
w Currently set surround mode
e
e Currently set input mode
Press <USER MODE> until “Memory” is displayed.
1
2
Press VIDEO SELECT until the desired image appears on
the monitor.
Combining the currently playing sound with the
desired image (VIDEO SELECT function)
• To cancel, press VIDEO SELECT to select “SOURCE”.
• The video source selected with the video select function is stored in
the memory for the different input sources.
The surround mode last selected and the input mode setting are stored
individually for the different input sources.
The surround parameters, tone control settings and playback level
balance for the different output channels are memorized for each
surround mode.
Personal memory plus function
Storing the settings in the memory
Press <USER MODE> at which the settings you want to
call out are stored.
Calling the settings out
About the button names in this explanation
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
ENTER
[NIGHT]
STATUS
[ D H F G]
INPUT SELECTOR
VIDEO SELECT
[ D H F G]
[ENTER]
[MODE]
[MEMORY]
INPUT SELECTOR
STATUS <USER MODE>
INPUT SELECTOR VIDEO SELECT