Operating time, Offset value, Table 32 – HEIDENHAIN PROFIBUS-DP (DPV0) User Manual
Page 54: Diagnostics, software version, Table 33, Diagnostic, operating time
Encoder and Gateway functionality, DPV0
54
DDLM_Slave_Diag
Octet
26
27
Bits
15-8
7-0
Data
2
7
-2
0
2
7
-2
0
Revision number
Index
Software Version
Table 32
Diagnostics, software version
5.6.13
Operating time
The operating time monitor stores the operating time for the
device in operating hours. The operating time is saved every six
minutes in the non-volatile memory in the device. This happens
as long as the device is under power. The operating time is
displayed as a 32-bit value without sign in 0.1 h by the
DDLM_Slave_Diag function.If the operating time function is
not supported by the device, it is set to the maximum value
(FFFF FFFF hex).
DDLM_Slave_Diag
Octet
28
29
30
31
Bits
31-24
23-16
15-8
7-0
Data
2
31
-2
24
2
23
-2
16
2
15
-2
8
2
7
-2
0
Operating time
Table 33
Diagnostic, operating time