Detail l – ShoreLand'r SL70TAL V.1 User Manual

Page 11

Advertising
background image

Midwest Industries, Inc.

Ida Grove, IA 51445

800.859.3028

www.shorelandr.com

0003355

REV C 2/14/06

Page 11

Rear Bunk Assembly

Mount the rear bunk support weldments to the pivot

weldments by placing them in the channel of the

pivot weldments and attaching with 1/2” x 4-1/2”

stainless steel hex bolts and 1/2” stainless steel

lock nuts. See Detail G on page 2. Place the bunk

assembly over the rear bunk support weldment,

align the holes of the bunk brackets with the holes

in the support weldment and secure using 1/2” x

1 1/2” stainless steel hex bolts and 1/2” stainless

steel lock nuts. Tighten but do not over tighten

because the bunks must rotate to conform to the

boat bottom.

Detail L

Advertising
This manual is related to the following products: